|Core Power is an authorized RLE
Distributor in Eastern Pennsylvania, Southern New Jersey, and
27% of business outages are caused by water intrusion caused by
A/C line breaks, roof and/or other building leaks, faulty sprinklers,
backed up drains, etc. Dollar losses tend to be extremely large.
RLE Leak Detection Systems continuously monitor underfloor areas
for water that can cause damage. Typical applications include use
under raised computer room floors, ceilings drip pans, and other
critical building locations. The versatile sensing cable can be
routed in a variety of patterns to meet individual requirements.
The cable can also be routed along chilled water lines, around ducting,
and through pipe chases.
LD5100 detects and reports the presence and the exact location
of water and other conductive liquids. When a conductive
liquid comes in contact with RLE's patented water detection
cable, the system pinpoints the location of the leak. Within
seconds, the system's alarm sounds and the distance to the
leak is shown on the liquid crystal display (LCD).
The operator then cross-references this distance with the
cable route map and quickly locates the water problem.
The LD5100 enables the protection of large critical spaces
against costly water damage and power outages, thereby helping
to improve the uptime of critical equipment and services.
LD2000 detects and reports the presence and the exact location
of water and other conductive liquids. When a
conductive liquid comes in contact with the leak detection
cable, within seconds the LD2000's LED flashes in alarm, and the
display LED provides a distance measurement. The physical
location of the leak can then be determined by cross-referencing
the displayed distance with a cable reference map.
This robust system is the most cost-effective distance read
panel on the market. No other distance read system in the world
is web-accessible, integration friendly, and/or provides direct
The SeaHawk LD1000 is a zone detection product that provides
additional flexibility to detect and report the presence of
water and any conductive liquids along the length of SeaHawk
leak detection cable.
When a water leak or the presence of
any conductive fluid is detected, the LD1000 control panel
visibly and audibly annunciates the leak, and indicates in which
zone the leak is located. The audible alarm is user configurable
for audible or non-audible. Cable trouble alert and sensitivity
adjustments are standard features which help eliminate false
The SeaHawk LD300 is a single zone system that detects and
reports the presence of water and any conductive liquid along
the length of RLE patented cable.
The SeaHawk LD300 is
ideal for smaller areas that require leak detection monitoring.
With a visual alarm indicator and two output relays for leak and
fault, the LD300 monitors up to 300 feet (91 meters) of SC
cable, which is often encircled around critical equipment.
RLE's patented SeaHawk™
water leak detection cable reliably senses any conductive
fluid. The unique design helps eliminate false alarms, dries
quickly, resists bends and kinks, and lies flat after installation.
Leak detection cable is sold in 25, 50, and 100 foot sections
with the end connectors installed. This modular design allows
existing cables to be expanded in the field by simply connecting
additional lengths. Mating connectors make installation and
replacement of damaged cable quick and easy.
RLE's SeaHawk™ Spot Water
Leak Detection products (SD series) provide the most cost-effective
way to report the presence of water and any other conductive
liquid at a single point. They are commonly used to identify
water in a contained area, such as small rooms, air conditioning
drip pans, and around floor drains.