MedPoweRx UPS Model LT/M (700VA – 2.1kVA)

The MedPoweRx UPS – Patient Vicinity Series, Model LT/M is a single phase, seamless transfer, UL 60601-1 listed, uninterruptible power system (UPS) for use with patient vicinity medical equipment such as: fluoroscopy, patient monitors, ultrasound and other critical medical equipment. The MedPoweRx not only protects sensitive medical equipment from power outages, but it also regulates voltage, attenuates harmonics, and eliminates line and ground noise. The Model LT/M is certified as meeting NFPA 99 leakage current requirements for portable patient vicinity equipment.

Size Range: 700VA – 2.1kVA

UltraUPS (3.0kVA – 5.0kVA)

The UltraUPS is a single phase, modular, True Online double conversion UPS system. The UltraUPS and it’s respective modules can fit in virtually any 19” rack or can be stacked on top of each other when rack space needs to be conserved or no rack is available. The UltraUPS, featuring Fuzzy Battery Intelligence, conserves precious battery power by increasing the input voltge window of the UPS, thus preventing unnecessary switching to battery. See below for more great features and benefits of the UltraUPS!


SureImage Power Processor Model 700F/M

The Power Processor Model 700F/M is a part of the SureImage, Imaging and Treatment Series of medical-grade power conditioners. The Model 700F/M is a power conditioning voltage regulator which provides stable and clean power to CT, MRI, PET, Linear Accelerator, X-Ray and other imaging/treatment equipment, ensuring accurate and clear image scans. The Model 700F/M uses a proprietary power sampling technique to ensure that the proper voltage value is always present at the load and that there are no damaging effects of over or undershoot of voltage. The Model 700F/M is provided in a front access only enclosure to minimize footprint, while increasing serviceability and ease of access.
The Model 700F/M has been shake-table tested and meets seismic standards which satisfy the California Office of Statewide Health Planning (OSHPD) requirements, as well as CBC 2013, and IBC 2015 standards! OSHPD monitors the planning and oversight of hospital construction; and mandates that any equipment required to withstand an earthquake and function afterwards, be approved and certified via shake-table testing. This mandates verification testing that most of the country recognizes, as well as other countries.

The Model 700F/M’s “OSHPD Seismic Pre-approval” (OSP) certification reduces the time required for an engineer to locate and select the necessary power conditioning and voltage regulating equipment!

Seismic-rated Model 700F/M models are available with an input nominal voltage of 208VAC, 240VAC, or 480VAC; and are provided on floor-mounting channels.

Three Phase Sizes: 60K(i), 75k(i), 100K(i), 160K(i), 210K(i),

SuiteLITE (600W – 3000W)

MRI suites use DC power instead of AC power because EMI produced by AC lighting affects image quality and equipment performance. The SuiteLITE is an AC to DC converter that takes normal AC power and converts it to DC power compatible with MRI suite lighting. The SuiteLITE features a manual dimmer to adjust intensity control, closed loop voltage regulation to within +/-2% to assure consistent intensity, as well as an isolation transformer to prevent high frequency noise from interfering with MRI equipment. An optional “In Suite” electronic dimmer control allows personnel to adjust intensity from within the MRI suite without interference to MRI equipment. The SuiteLITE is for use with 120V incandescent lamps only.
Single Phase Sizes: 600W, 1200W, 2000W, 3000W

Click here

Contact us for Controlled Power Company Products and Service

Click here